Operation Manual

Manage and Monitor the Switch
72
ProSAFE 10-Gigabit Ethernet Web Managed Switch
If you do not know the IP address of the switch, see Access the Switch Using a Web
Browser on page 14.
The login window opens.
4. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Information page displays.
5. Select System > Maintenance > Restore Configuration.
The Restore Configuration page displays.
6. Click the Browse button and locate and select the saved configuration file (a .cfg file).
7. Click the Apply button.
The saved configuration is restored to the switch.
Use the ProSAFE Plus Utility to Restore a Saved Switch
Configuration
 To restore the switch configuration that you saved:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > Maintenance > Restore Configuration.
The Restore Configuration page displays.
7. Click the BROWSE button.
8. Find and select the configuration file (a .cfg file).
9. Click the APPLY button.
The saved configuration is restored to the switch. The switch reboots to load the restored
configuration.