Operation Manual

Manage and Monitor the Switch
71
ProSAFE 10-Gigabit Ethernet Web Managed Switch
Use the ProSAFE Plus Utility to Save the Switch Configuration
 To save the switch configuration:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select System > Maintenance > Save Configuration.
The Save Configuration page displays.
7. Click the BROWSE button.
8. Select the location to save the configuration file (a .cfg file).
9. Click the APPLY button.
The switch configuration is saved.
Restore a Saved Switch Configuration
You can restore switch configuration that you saved.
Use Browser-Based Access to Restore a Saved Switch
Configuration
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Launch a web browser.
3. In the address field of your web browser, enter the IP address of the switch.