Operation Manual

Manage and Monitor the Switch
63
ProSAFE 10-Gigabit Ethernet Web Managed Switch
8. To configure more ports, repeat Step 6 and Step 7.
9. Click the Apply button.
Your settings are saved.
Use the ProSAFE Plus Utility to Specify the Port Speed or Shut
Down a Port
 To specify the port speed or shut down a port:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
Note: To navigate to this page, select System > Switch Status.