Operation Manual

Use VLANS for Traffic Segmentation
58
ProSAFE 10-Gigabit Ethernet Web Managed Switch
6. Select VLAN > 802.1Q > Advanced > PVID.
You can select Port PVID only if you already enabled the advanced 802.1Q VLAN option
(see Create 802.1Q-Based VLANs in an Advanced Configuration on page 50).
7. Select one or more ports.
8. Enter the PVID.
You can enter a PVID only for a VLAN that already exists.
9. Click the APPLY button.
Your settings are saved.