Operation Manual

Use VLANS for Traffic Segmentation

ProSAFE 10-Gigabit Ethernet Web Managed Switch

8. Click the Yes button.

The pop-up window closes and the VLAN Identifier Setting table displays.

9. In the VLAN ID field, enter a VLAN ID.

You can enter a VLAN ID from 1 to 4093.

10. Click the ADD button.

The new VLAN is added to the VLAN Identifier Setting table.

After you create a new VLAN ID, use the VLAN membership option to add ports to the

VLAN. (Select VLAN > 802.1Q > Advanced > VLAN Membership. See also Add

Tagged or Untagged Ports to an 802.1Q-Based VLAN on page 53.)

Note: To delete a VLAN, select the check box for the VLAN and click the

Delete button.

Add Tagged or Untagged Ports to an 802.1Q-Based VLAN

After you define a VLAN ID using the advanced 802.1Q VLAN option (see Create

802.1Q-Based VLANs in an Advanced Configuration on page 50), you must add ports to the

VLAN.

While you add ports to a VLAN, you can specify whether the ports must be tagged or

untagged. Port tagging allows a port to be associated with a particular VLAN and allows the

VLAN ID tag to be added to data packets that are sent through the port. The tag identifies the

VLAN that must receive the data.

By default, all ports are untagged.