Operation Manual

Use VLANS for Traffic Segmentation
52
ProSAFE 10-Gigabit Ethernet Web Managed Switch
9. In the VLAN ID field, enter a VLAN ID.
You can enter a VLAN ID from 1 to 4093.
10. Click the Add button.
The new VLAN is added to the VLAN Identifier Setting table.
After you create a new VLAN ID, use the VLAN membership option to add ports to the
VLAN. (Select VLAN > 802.1Q > Advanced > VLAN Membership. See also Add
Tagged or Untagged Ports to an 802.1Q-Based VLAN.)
Note: To delete a VLAN, select the check box for the VLAN and click the
Delete button.
Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in
an Advanced Configuration
 To create 802.1Q-based VLANs in an advanced configuration:
1. Connect your computer to the same network as the switch.
You can use a WiFi or wired network connection, or connect directly to a switch that is
off-network using an Ethernet cable.
2. Double-click the ProSAFE Plus Utility icon.
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select VLAN > 802.1Q > Advanced.
The Advanced 802.1Q VLAN Configuration page displays.
7. If this is the first time that you are accessing the Advanced 802.1Q VLAN Configuration
page or if you are changing the VLAN assignment method, select the Enable radio button
and continue with Step 8.
Otherwise, go to Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.