Operation Manual

Use VLANS for Traffic Segmentation
47
ProSAFE 10-Gigabit Ethernet Web Managed Switch
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select VLAN > Port Based > Advanced.
The Advanced Port-based VLAN page displays.
7. If this is the first time that you are accessing the Advanced Port-based VLAN Configuration
page or if you are changing the VLAN assignment method, select the Enable radio button
and continue with Step 8.
Otherwise, go to Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
8. Click the Yes button.
The pop-up window closes and the VLAN Configuration and VLAN Membership sections
display.
9. In the VLAN identifier menu, select the VLAN.
10. Select the ports that you want to add to the VLAN by doing the following:
a. (Optional) In the Group Operation menu, select either Select All or Remove All.
All ports are either added to the VLAN or removed from the VLAN.
b. Select or remove individual ports by selecting the check boxes under the port
numbers.