Operation Manual

Use VLANS for Traffic Segmentation
44
ProSAFE 10-Gigabit Ethernet Web Managed Switch
The Switch Selection page displays a list of Web Managed switches that it discovers on
the local network.
3. Select the switch.
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select VLAN.
The Basic Port-based VLAN page displays.
7. If this is the first time that you are accessing the Basic Port-based VLAN Configuration
page or if you are changing the VLAN assignment method, select the Enable radio button
and continue with Step 8.
Otherwise, go to Step 9.
A pop-up window opens, informing you that the current VLAN settings will be lost.
8. Click the Yes button.
The pop-up window closes and the Basic Port-based VLAN Configuration page displays.
9. Under each port to be added to a VLAN, enter the VLAN ID of the VLAN.
You can enter a VLAN ID from 1 to 8 or 1 to 16, depending on the switch model. If all the
VLANs share an uplink to the Internet or servers, enter all in the VLAN ID field for the port
that you want to use for the uplink.
Note: If ports are members of the same LAG, you must assign them to the same
VLAN.
10. Click the APPLY button.
Your settings are saved.