Operation Manual

Optimize Performance With Quality of Service
40
ProSAFE 10-Gigabit Ethernet Web Managed Switch
6. Select QoS > Broadcast Filtering.
The Broadcast Filtering page displays.
7. If this is the first time that you are setting up broadcast filtering, select the Enable radio
button and continue with Step 8.
Otherwise, go to Step 9.
8. Click the Apply button.
Your settings are saved and the Storm control rate table displays.
9. Set the storm control rate by doing the following:
a. Select one or more ports.
b. In the Storm control rate menu, select the maximum rate.
You can set a rate from 32 to 4096 Mbps. By default, no limit is set.
c. Click the APPLY button.
Your settings are saved.
10. To set a different rate for one or more other ports, repeat Step 9.