Operation Manual

4
ProSAFE 10-Gigabit Ethernet Web Managed Switch
Chapter 4 Optimize Performance With Quality of Service
Enable 802.1p/DSCP-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . 31
Use Browser-Based Access to Enable 802.1p/DSCP-Based QoS . . . . . . . . 31
Use the ProSAFE Plus Utility to Enable 802.1p/DSCP-Based QoS. . . . . . . . 32
Configure Port-Based Quality of Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Use Browser-Based Access to Configure Port-Based QoS . . . . . . . . . . . . . . 33
Use the ProSAFE Plus Utility to Configure Port-Based QoS. . . . . . . . . . . . . . 34
Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Use Browser-Based Access to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . . 35
Use the ProSAFE Plus Utility to Set Up Rate Limiting . . . . . . . . . . . . . . . . . . . 36
Set Up Broadcast Filtering . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
Use Browser-Based Access to Set Up Broadcast Filtering . . . . . . . . . . . . . . . 38
Use the ProSAFE Plus Utility to Set Up Broadcast Filtering . . . . . . . . . . . . . . 39
Chapter 5 Use VLANS for Traffic Segmentation
VLAN Overview . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Create Basic Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Use Browser-Based Access to Create Basic Port-Based VLANs . . . . . . . . . . 42
Use the ProSAFE Plus Utility to Create Basic Port-Based VLANs . . . . . . . . . 43
Assign Ports to Multiple Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Use Browser-Based Access to Assign Ports to Multiple
Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
Use the ProSAFE Plus Utility to Assign Ports to Multiple
Port-Based VLANs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 46
Create 802.1Q-Based VLANs in a Basic Configuration. . . . . . . . . . . . . . . . . . . . 48
Use Browser-Based Access to Create 802.1Q-Based VLANs
in a Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs
in a Basic Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Create 802.1Q-Based VLANs in an Advanced Configuration . . . . . . . . . . . . . . 50
Use Browser-Based Access to Create 802.1Q-Based VLANs in
an Advanced Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
Use the ProSAFE Plus Utility to Create 802.1Q-Based VLANs in
an Advanced Configuration. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52
Add Tagged or Untagged Ports to an 802.1Q-Based VLAN. . . . . . . . . . . . . . . . 53
Use Browser-Based Access to Add Tagged or Untagged Ports
to an 802.1Q-Based VLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Use the ProSAFE Plus Utility to Add Tagged or Untagged
Ports to an 802.1Q-Based VLAN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55
Specify a Port PVID for an 802.1Q-Based VLAN . . . . . . . . . . . . . . . . . . . . . . . . 56
Use Browser-Based Access to Assign a PVID to Ports . . . . . . . . . . . . . . . . . . 56
Use the ProSAFE Plus Utility to Assign a PVID to Ports. . . . . . . . . . . . . . . . . . 57
Chapter 6 Manage and Monitor the Switch
Manage Flow Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
Use Browser-Based Access to Manage Flow Control . . . . . . . . . . . . . . . . . . . 60