Operation Manual

Optimize Performance With Quality of Service
37
ProSAFE 10-Gigabit Ethernet Web Managed Switch
If you do not see the switch, click the REFRESH button.
4. Click the APPLY button.
You are asked to enter the password for the switch.
5. Enter the switch’s password in the password field.
The switch’s default password is password.
The Switch Status page displays.
6. Select QoS > Rate Limit.
7. Select one or more ports.
8. Set the ingress (incoming) and egress (outgoing) traffic rates by doing the following:
a. Select one or more ports.
b. In the Ingress Rate menu, select the maximum rate.
You can set a rate from 32 to 4096 Mbit/s. By default, no limit is set.
c. In the Egress Rate menu, select the maximum rate.
You can set a rate from 32 to 4096 Mbit/s. By default, no limit is set.
d. Click the APPLY button.
Your settings are saved.
9. To set different rates for one or more other ports, repeat Step 8.