Operation Manual

Network Settings
29
ProSAFE 10-Gigabit Ethernet Web Managed Switch
7. In the LAG ID menu, select the LAG ID.
The switch supports four static LAGs.
8. Select the ports for the LAG by selecting the associated check boxes under the port
numbers.
A LAG consists of at least two ports.
9. Click the APPLY button.
Your settings are saved.
10. Select System > LAG.
11. Select the ID of the LAG for which you just set up the port membership.
12. In the Admin Mode menu, select Enable.
13. Click the APPLY button.
Your settings are saved.