Operation Manual

• Disable. Disables the Ethernet port aggregation function on the router. Ethernet
port 1 and port 2 can be used as independent Ethernet ports.
• Enable (LACP-IEEE 803.3ad). The router communicates with the device connected
to Ethernet port 1 and port 2 on the router, and checks to see if Ethernet port
aggregation is supported on the device. If Ethernet port aggregation is supported,
the router automatically trunks Ethernet port 1 and port 2. If not, Ethernet port 1
and port 2 work as independent Ethernet ports. This option is selected by default.
We recommend that you select this option unless your NAS or switch can support
static LAG only.
• Enable static LAG. If your device supports static LAGs only, select this option.
Otherwise, we recommend that you to select the Enable (LACP-IEE 803.3ad)
radio button instead.
Note: You must enable static LAG mode before you connect your device to
Ethernet port 1 and port 2 on the router.
6.
Click the Apply button.
Your settings are saved.
User Manual146Maintain the Router
Nighthawk AD7200 Gaming Router Model XR700