User's Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually Set Up the Internet Connection
- Specify IPv6 Internet Connections
- Requirements for Entering IPv6 Addresses
- Use Auto Detect for an IPv6 Internet Connection
- Use Auto Config for an IPv6 Internet Connection
- Set Up an IPv6 6to4 Tunnel Internet Connection
- Set Up an IPv6 Pass Through Internet Connection
- Set Up an IPv6 Fixed Internet Connection
- Set Up an IPv6 DHCP Internet Connection
- Set Up an IPv6 PPPoE Internet Connection
- Set Up an IPv6 6rd Internet Connection
- Change the MTU Size
- 4. Optimize Gaming and Customize Quality of Service Settings
- Decrease lag by Using the Geo Filter
- Use the Geo Filter by Setting Your Home Area and the Distance Radius
- Use the Geo Filter by Drawing Areas
- Ping a Device and Allow or Deny the Device a Connection
- View the Automatically Generated Ping Graph for a Connection
- Add a Device to the Geo Filter
- Remove a Device From the Geo Filter
- Manage the Geo Filter Map Settings
- Run and Manage Connection Benchmark Tests
- Manage Bandwidth Allocation
- Manage Traffic Prioritization
- Decrease lag by Using the Geo Filter
- 5. Monitor Game Servers and Your Devices, Router, and Network
- 6. Control Access to and From the Internet
- Manage NETGEAR Armor
- Allow, Block, or Reject Traffic Categories, Specific Games, or Port Ranges With Traffic Rules
- Add a Rule to Allow, Block, or Reject Traffic
- Change a Traffic Rule
- Change the Action for a Traffic Rule
- Reorder the Priority of a Traffic Rule
- Enable or Disable a Traffic Rule
- Enable or Disable all Traffic Rules
- Enable or Disable Tracking for a Traffic Rule
- Remove a Traffic Rule
- View Traffic Analytics and Events for a Traffic Rule
- Block Access to Internet Sites Using Keywords
- Block Services and Applications With Simple Outbound Firewall Rules
- Set Up a Schedule for Keyword Blocking and Simple Outbound Firewall Rules
- Set Up Email Notifications for Security Events and Log Messages
- 7. Manage the Router’s Network Settings
- View or Change WAN Settings
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the Router’s LAN IP Address and RIP Settings
- Specify the IP Addresses That the Router Assigns
- Disable the DHCP Server Feature in the Router
- Manage Reserved LAN IP Addresses
- Set Up a Bridge to Your ISP’s Network Using a Port Group or VLAN Tag Group
- Manage Custom Static Routes
- Improve Network Connections With Universal Plug and Play
- 8. Manage the Router’s WiFi Settings
- Specify Basic WiFi Settings
- Change the WiFi Password or Security Level
- Change the WiFi Mode for Download and Upload Speeds
- Set Up a Guest WiFi Network
- Use the WPS Wizard for WiFi Connections
- Control the WiFi Radios
- Set Up a WiFi Schedule
- Enable or Disable AX WiFi
- Enable or Disable OFDMA
- Enable or Disable Smart Connect
- Manage Implicit Beamforming
- Enable or Disable MU-MIMO
- Change the Transmission Power Control
- Enable Bridge Mode
- Use the Router as a WiFi Access Point Only
- 9. Maintain the Router
- Update the Router Firmware
- Change the admin Password
- Enable admin Password Recovery
- Recover the admin Password
- Manage the Router Configuration File
- Return the Router to its Factory Default Settings
- Set Your Time Zone
- Change the NTP Server
- Monitor and Meter Internet Traffic
- View and Manage Logs of Router Activity
- Display Internet Port Statistics
- Check the Internet Connection Status, View Details, and Release and Renew the Connection
- Restart the Router From Its Web Interface
- View Router Notifications
- Disable the Media Server
- Turn Off the Router LEDs
- Access Your Router Using the Nighthawk App
- 10. Share USB Storage Devices Attached to the Router
- USB device requirements
- Access a storage device connected to the router
- Access a storage device connected to the router from a Windows-based computer
- Map a USB device to a Windows network drive
- Access a Storage Device That Is Connected to the Router From a Mac
- Manage Access to a USB Storage Device
- Use FTP Within Your Network
- Manage Network Folders on a USB Storage Device
- Safely Remove a USB Storage Device
- 11. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 12. Share a USB Printer
- 13. Use VPN to Access Your Network
- 14. Manage and Customize Internet Traffic Rules for Ports
- 15. Troubleshooting
- 16. Supplemental Information
6. Locate the Internet Status pane and check to see that an IP address is shown in the
WAN IP field. If 0.0.0.0 is shown, your router did not obtain an IP address from your
ISP.
If your router cannot obtain an IP address from the ISP, you might need to force your
cable or DSL modem to recognize your new router by restarting your network. For more
information, see Check the Internet Connection Status, View Details, and Release and
Renew the Connection on page 167.
If your router is still unable to obtain an IP address from the ISP, the problem might be
one of the following:
•
Your Internet service provider (ISP) might require a login program. Ask your ISP
whether they require PPP over Ethernet (PPPoE) or some other type of login.
•
If your ISP requires a login, the login name and password might be set incorrectly.
•
Your ISP might check for your computer’s host name. Assign the computer host
name of your ISP account as the account name on the Internet Setup page.
•
If your ISP allows only one Ethernet MAC address to connect to Internet and checks
for your computer’s MAC address, do one of the following:
-
Inform your ISP that you bought a new network device and ask them to use the
router’s MAC address.
-
Configure your router to clone your computer’s MAC address.
If your router obtained an IP address, but your computer does not load any web pages
from the Internet, it might be for one or more of the following reasons:
•
Your computer might not recognize any DNS server addresses.
A DNS server is a host on the Internet that translates Internet names (such as www
addresses) to numeric IP addresses. Typically, your ISP provides the addresses of
one or two DNS servers for your use. If you entered a DNS address during the router’s
configuration, reboot your computer, and verify the DNS address. You can configure
your computer manually with DNS addresses, as explained in your operating system
documentation.
•
The router might not be configured as the TCP/IP gateway on your computer.
If your computer obtains its information from the router by DHCP, reboot the
computer and verify the gateway address.
•
You might be running login software that is no longer needed.
If your ISP provided a program to log you in to the Internet (such as WinPoET), you
no longer need to run that software after installing your router. If you use Internet
Explorer, select Tools > Internet Options, click the Connections tab, and select
Never dial a connection. Other browsers provide similar options.
User Manual224Troubleshooting
Nighthawk Pro Gaming Router Model XR1000