User's Manual
Table Of Contents
- Contents
- 1. Hardware Setup
- 2. Connect to the Network and Access the Router
- 3. Specify Your Internet Settings
- Use the Internet Setup Wizard
- Manually Set Up the Internet Connection
- Specify IPv6 Internet Connections
- Requirements for Entering IPv6 Addresses
- Use Auto Detect for an IPv6 Internet Connection
- Use Auto Config for an IPv6 Internet Connection
- Set Up an IPv6 6to4 Tunnel Internet Connection
- Set Up an IPv6 Pass Through Internet Connection
- Set Up an IPv6 Fixed Internet Connection
- Set Up an IPv6 DHCP Internet Connection
- Set Up an IPv6 PPPoE Internet Connection
- Set Up an IPv6 6rd Internet Connection
- Change the MTU Size
- 4. Optimize Gaming and Customize Quality of Service Settings
- Decrease lag by Using the Geo Filter
- Use the Geo Filter by Setting Your Home Area and the Distance Radius
- Use the Geo Filter by Drawing Areas
- Ping a Device and Allow or Deny the Device a Connection
- View the Automatically Generated Ping Graph for a Connection
- Add a Device to the Geo Filter
- Remove a Device From the Geo Filter
- Manage the Geo Filter Map Settings
- Run and Manage Connection Benchmark Tests
- Manage Bandwidth Allocation
- Manage Traffic Prioritization
- Decrease lag by Using the Geo Filter
- 5. Monitor Game Servers and Your Devices, Router, and Network
- 6. Control Access to and From the Internet
- Manage NETGEAR Armor
- Allow, Block, or Reject Traffic Categories, Specific Games, or Port Ranges With Traffic Rules
- Add a Rule to Allow, Block, or Reject Traffic
- Change a Traffic Rule
- Change the Action for a Traffic Rule
- Reorder the Priority of a Traffic Rule
- Enable or Disable a Traffic Rule
- Enable or Disable all Traffic Rules
- Enable or Disable Tracking for a Traffic Rule
- Remove a Traffic Rule
- View Traffic Analytics and Events for a Traffic Rule
- Block Access to Internet Sites Using Keywords
- Block Services and Applications With Simple Outbound Firewall Rules
- Set Up a Schedule for Keyword Blocking and Simple Outbound Firewall Rules
- Set Up Email Notifications for Security Events and Log Messages
- 7. Manage the Router’s Network Settings
- View or Change WAN Settings
- Set Up a Default DMZ Server
- Change the Router’s Device Name
- Change the Router’s LAN IP Address and RIP Settings
- Specify the IP Addresses That the Router Assigns
- Disable the DHCP Server Feature in the Router
- Manage Reserved LAN IP Addresses
- Set Up a Bridge to Your ISP’s Network Using a Port Group or VLAN Tag Group
- Manage Custom Static Routes
- Improve Network Connections With Universal Plug and Play
- 8. Manage the Router’s WiFi Settings
- Specify Basic WiFi Settings
- Change the WiFi Password or Security Level
- Change the WiFi Mode for Download and Upload Speeds
- Set Up a Guest WiFi Network
- Use the WPS Wizard for WiFi Connections
- Control the WiFi Radios
- Set Up a WiFi Schedule
- Enable or Disable AX WiFi
- Enable or Disable OFDMA
- Enable or Disable Smart Connect
- Manage Implicit Beamforming
- Enable or Disable MU-MIMO
- Change the Transmission Power Control
- Enable Bridge Mode
- Use the Router as a WiFi Access Point Only
- 9. Maintain the Router
- Update the Router Firmware
- Change the admin Password
- Enable admin Password Recovery
- Recover the admin Password
- Manage the Router Configuration File
- Return the Router to its Factory Default Settings
- Set Your Time Zone
- Change the NTP Server
- Monitor and Meter Internet Traffic
- View and Manage Logs of Router Activity
- Display Internet Port Statistics
- Check the Internet Connection Status, View Details, and Release and Renew the Connection
- Restart the Router From Its Web Interface
- View Router Notifications
- Disable the Media Server
- Turn Off the Router LEDs
- Access Your Router Using the Nighthawk App
- 10. Share USB Storage Devices Attached to the Router
- USB device requirements
- Access a storage device connected to the router
- Access a storage device connected to the router from a Windows-based computer
- Map a USB device to a Windows network drive
- Access a Storage Device That Is Connected to the Router From a Mac
- Manage Access to a USB Storage Device
- Use FTP Within Your Network
- Manage Network Folders on a USB Storage Device
- Safely Remove a USB Storage Device
- 11. Use Dynamic DNS to Access USB Storage Devices Through the Internet
- 12. Share a USB Printer
- 13. Use VPN to Access Your Network
- 14. Manage and Customize Internet Traffic Rules for Ports
- 15. Troubleshooting
- 16. Supplemental Information
8
Manage the Router’s WiFi Settings
The router comes ready for WiFi connections. You can customize the router’s WiFi
settings.
This chapter includes the following sections:
• Specify Basic WiFi Settings
• Change the WiFi Password or Security Level
• Change the WiFi Mode for Download and Upload Speeds
• Set Up a Guest WiFi Network
• Use the WPS Wizard for WiFi Connections
• Control the WiFi Radios
• Set Up a WiFi Schedule
• Enable or Disable AX WiFi
• Enable or Disable OFDMA
• Enable or Disable Smart Connect
• Manage Implicit Beamforming
• Enable or Disable MU-MIMO
• Change the Transmission Power Control
• Enable Bridge Mode
• Use the Router as a WiFi Access Point Only
129