User Manual

Configuring System Information
96
M6100 Web Management User Guide
Advanced
Use the Advanced page to configure the advanced PoE settings.
From the Advanced link, you can access the following pages:
• PoE Configuration on page 96
• PoE Port Configuration on page 97
PoE Configuration
To display the Advanced PoE Configuration page, click System > PoE > Advanced > PoE
Configuration. A screen similar to the following is displayed.
1. The Unit Selection field displays the current PoE unit. To change the PoE unit, select
another unit from the drop down box.
The following table describes the PoE Configuration non-configurable fields.
Table 53.
Field Description
Units Displays the Current PoE Unit. You can change the
PoE Unit by selecting another unit ID listed here.
Firmware Version Version of the PoE controller's FW image.
Power Status Indicates the power status.
Total Power (Main AC) Displays the total power provided by the MAIN AC
power source.
Total Power (RPS)
Total Power (PD) for GSM5212P switches only
Displays the total power provided by the redundant
power source.
Power Source Current source of system power (Main AC or RPS).
Threshold Power System can power up one port, if consumed power is
less than this power
. i.e. Consumed power can be
between Nominal and Threshold Power values. The
threshold power value is effected by changing
System Usage Threshold.
Consumed Power Total amount of a power which is currently being
delivered to all ports.