User Manual

Managing Device Security
456
M6100 Web Management User Guide
• Enable port-security on the interface level.
IPSG Port Security can't be Enabled if IPSG is Disabled. The factory default is disabled.
IP Source Guard Binding Configuration
To display the IP Source Guard Binding Configuration page, click Security  Control> IP
Source Guard
 Binding Configuration.
Static Binding Configuration
1. Interface - Selects the interface to add a binding into the IPSG database.
2. Use MAC Address to specify the MAC address for the binding.
3. Use VLAN ID to select the VLAN from the list for the binding rule.
4. Use IP Address to specify valid IP
Address for the binding rule.
5. Click Add to add IPSG static binding entry into the database.
6. Click Delete to delete selected static entries from the database.
Dynamic Binding Configuration
Field Description
Interface Displays the interface to add a binding into the IPSG
database.
MAC Address Displays the MAC address for the binding entry.
VLAN ID Displays the VLAN from the list for the binding entry.
IP Address Displays valid IP Address for the binding entry.
Filter Type Filter Type used on the interface. One is source IP
address filter type, the other is source IP address
and MAC address filter type.
Click Clear to clear all the dynamic binding entries.