User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Quality of Service
392
M6100 Web Management User Guide
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. If you change any of the settings on the page, click Apply to send the updated configuration
to the switch. Configuration changes take ef
fect immediately.
Field Description
Policy Name Displays name of the DiffServ policy.
Policy Type Displays type of the policy as In
Member Class Name Displays name of each class instance within the
policy
.
Service Interface Configuration
Use the Service Interface Configuration page to activate a policy on an interface.
To display the page, click QoS
DiffServ Advanced Service Interface Configuration.
To configure DiffServ policy settings on an interface:
1. Use Interface to select the interface on which you will configure the Dif
fServ service.
2. Policy Name - Lists all the policy names from which one can be selected.
This field is not
shown for Read/Write users where inbound service policy attachment is not supported by
the platform.
Field Description
Direction Shows that the traffic direction of this service
interface is In.
Operational Status Shows the operational status of this service
interface, either Up or Down.