User Manual

Routing
319
M6100 Web Management User Guide
OSPFv3 Route Redistribution
Use this screen to configure the OSPFv3 Route Redistribution parameters. The allowable
values for each field are displayed next to the field. If any invalid values are entered, an alert
message is displayed with the list of all the valid values.
 To display the OSPFv3 Route Redistribution page, click Routing > OSPFv3 > Advanced >
Route Redistribution. The following page is displayed.
 Configure the OSPFv3 Route Redistribution.
1. From the Source menu, select from the list of available source routes that have not
previously been configured for redistribution by OSPFv3.
The valid values are:
• Connected
• Static
2. In the Redistribute Option list, select to Enable or Disable the redistribution for the
selected source protocol.
3. Set the Metric value to be used as the metric of redistributed routes.
This fields displays the
metric if the source was preconfigured, otherwise the tag is 0 and can be modified. Valid
values are 0 to 16777214.
State (continued) • Designated Router — This router is itself the Designated Router on the
attached network. Adjacencies are established to all other routers
attached to the network. The router must also originate a network-LSA
for the network node. The network- LSA will contain links to all routers
(including the Designated Router itself) attached to the network.
• Backup Designated Router — This router is itself the Backup
Designated Router on the attached network. It will be promoted to
Designated Router if the present Designated Router fails.
The router
establishes adjacencies to all other routers attached to the network. The
Backup Designated Router performs slightly different functions during the
Flooding Procedure, as compared to the Designated Router.
• Other Designated Router — The interface is connected to a broadcast
or NBMA network on which other routers have been selected to be the
Designated Router and Backup Designated Router either
. The router
attempts to form adjacencies to both the Designated Router and the
Backup Designated Router.
Metric
The metric value used by the Virtual Link.
Field Description