User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Field Description
Total Entry Count Total number of Entries in the ARP table.
Peak Total Entries Highest value reached by Total Entry Count. This
counter value is restarted whenever the
ARP table
Cache Size value is changed.
Active Static Entries Total number of Active Static Entries in the ARP
table.
Configured Static Entries Total number of Configured Static Entries in the ARP
table.
Maximum Static Entries Maximum number of Static Entries that can be
defined.
Routing
256
M6100 Web Management User Guide
RIP
The Routing > RIP tab contains links to the following web pages that you use to configure
and display RIP data:
• Basic RIP Configuration
• Advanced RIP Configuration on page 256
Basic RIP Configuration
To display the Basic RIP Configuration page, click Routing > RIP > Basic > RIP
Configuration. The following page is displayed.
Configure the RIP settings.
• In the RIP Admin
Mode field, select the Enable or Disable option. If you select enable,
RIP will be activated for the switch. The default is Enable.
Advanced RIP Configuration
.From the Routing > RIP > Advanced link, you can access the following pages:
• RIP Configuration
• Advanced RIP Interface Configuration on page 258