User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
186
M6100 Web Management User Guide
1. Use Interface to specify the interface you want to configure.
2. Use Admin Mode to Enable or Disable MVR on a port.
The factory default is Disable.
3. Use T
ype to configure the port as an MVR receiver port or a source port. The default port
type is none.
4. Use Immediate Leave to Enable or Disable the Immediate Leave feature of MVR on a
port. The
factory default is Disable.
5. Click Update to update the page with the latest information on the switch.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
7. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
Field Definition
Status Displays the status of the specific port.
MVR Group Membership
To display the MVR Configuration page, click Switching > MVR > Advanced > MVR Group
Membership. A screen similar to the following is displayed.
1. Use the Group IP to specify the IP multicast address of the MVR group for which you
want to display or configure data.