User Manual

Maintenance
524
M6100 Web Management User Guide
• TFTP - Trivial File Transfer Protocol
• SFTP - Secure File
Transfer Program
• SCP - Secure Copy
• FTP - File
Transfer Protocol
4. Use Server Address
Type to specify either IPv4, IPv6 or DNS to indicate the format of the
Server Address field. The factory default is IPv4.
5. Use Server Address to enter the IP address of the server in accordance with the format
indicated by the Seer
Address Type. The factory default is the IPv4 address 0.0.0.0.
6. Use Remote File Path to enter the path where you want to upload the file. File path may
include alphabetic, numeric, forward slash, dot or underscore characters only
. You may
enter up to 160 characters. The factory default is blank.
7. Use Remote File Name to enter the name of the file you want to download from the server
.
You may enter up to 32 characters. The factory default is blank.
8. Use Local File Name to specify the local script file name you want to upload.
This field is
visible only when File Type is Script File.
9. Use User Name to enter the username for remote login to SFTP/SCP server where the file
will be sent.
This field is visible only when SFTP or SCP transfer modes are selected.
10. Use Password to enter the password for remote login to SFTP/SCP server where the file
will be sent.
This field is visible only when SFTP or SCP transfer modes are selected.
11. The last row of the table is used to display information about the progress of the file transfer
.
HTTP File Upload
To display the HTTP File Upload page, click Maintenance  Upload  HTTP File Upload.
1. Use File Type to specify what type of file you want to upload:
• Archive - Specify archive (STK) code when you want to retrieve from the operational
flash:
• Image Name - Select one of the images from the list:
• Image1 - Specify the code image1 when you want to retrieve.
• Image2 - Specify the code image2 when you want to retrieve.
• CLI Banner - Specify CLI Banner when you want retrieve the CLI banner file.
• T
ext Configuration - Specify configuration in text mode when you want to retrieve the
stored configuration.
• Script File - Specify script file when you want to retrieve the stored configuration.