User Manual

Monitoring the System
508
M6100 Web Management User Guide
2110 on Aug 24 05:34:05 by line 318 of file mstp_api.c. This is the 237th message
logged. Messages logged to a collector or relay via syslog have an identical format to the
above message.
• T
otal number of Messages: For the message log, only the latest 200 entries are
displayed on the screen.
Command Log Configuration
To access the Command Log Configuration page, click Monitoring  Logs > Command Log
Configuration.
1. Use Admin Mode to enable/disable the operation of the CLI Command logging by
selecting the corresponding radio button.
Console Log Configuration
This allows logging to any serial device attached to the host.
To access the Console Log Configuration page, click Monitoring
 Logs > Console Log
Configuration.
1. A log that is “Disabled” shall not log messages. A log that is “Enabled” shall log
messages. Enable or Disable logging by selecting the corresponding radio button.
2. Severity Filter.
A log records messages equal to or above a configured severity threshold.
Select the severity option by selecting the corresponding line on the drop-down entry field.
These severity levels have been enumerated below:
• Emergency (0) - system is unusable
• Alert (1) - action must be taken immediately
• Critical (2) - critical conditions
• Error (3) - error conditions
• W
arning (4) - warning conditions
• Notice(5) - normal but significant conditions