User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
344
M6100 Web Management User Guide
• Select Group IP from the Search list, enter the Multicast Group IP, then click Go. If
the entry exists, that entry with the matching Group IP is displayed as the first entry,
followed by the remaining entries. An exact match is required.
Table 137, Multicast IGMP Membership describes the non-configurable data that is
displayed.
Click Update to update the page with the latest information on the switch.
Table 137. Multicast IGMP Membership
Field Description
Interface The interface on which multicast packets are forwarded.
Group IP The IP multicast group address for which data is to be displayed.
Compatibility Mode This parameter shows group compatibility mode (v1, v2 and v3) for this group
on the specified interface.
Source Filter Mode The source filter mode (Include, Exclude, or NA) for the specified group on
this interface. When NA mode is active, the field is blank.
Source Hosts This parameter shows source addresses which are members of this multicast
address.
Expiry Time This parameter shows expiry time interval against each source address
which are members of this multicast group.
This is the amount of time after
which the specified source entry is aged out.
IGMP Proxy Interface Configuration
To display the Multicast IGMP Proxy Interface Configuration page, click Routing Multicast
IGMP
Proxy Interface Configuration. The following page is displayed.