User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
331
M6100 Web Management User Guide
• Multicast Global Configuration on page 332
• Multicast Interface Configuration on page 333
• Multicast DVMRP on page 333
• Multicast IGMP on page 339
• Multicast PIM on page 347
• Multicast Static Routes Configuration on page 353
• Multicast Admin Boundary Configuration on page 353
Multicast Mroute Table
To display the Mroute Table page, click Routing > Multicast > Mroute Table. The following
page is displayed.
Table 127, Multicast Mroute Table describes the non-configurable data that is displayed.
Click Update to update the page with the latest information on the switch.
Table 127. Multicast Mroute Table
Field Description
Group IP The destination group IP address.
Source IP The IP address of the multicast packet source to be combined with the
Group IP to fully identify a single route whose Mroute table entry
.
Incoming Interface The incoming interface on which multicast packets for this source/group
arrive.
Outgoing Interfaces The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
Up Time (hh:mm:ss) The time in seconds since the entry was created.
Expiry Time (hh:mm:ss) The time in seconds before this entry will age out and be removed from the
table.
RPF Neighbor The IP address of the Reverse Path Forwarding (RPF) neighbor.