User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
264
M6100 Web Management User Guide
Configure the Default Route Advertise settings.
1. In the Default Information Originate field, select the Enable or Disable option. If you
select enable, OSPF originates an external LSA advertising a default route
(0.0.0.0/0.0.0.0). Default Information Originate is Disabled by default.
2. In the Always field, select T
rue or False. If Default Information Originate is enabled, but
the Always option is False, OSPF will only originate a default route if the router already
has a default route in its routing table. Set Always to True to force OSPF to originate a
default route regardless of whether the router has a default route. The default is False.
3. In the Metric field, specify the metric of the default route. V
alid values range from 0 to
16777214. The default is 0.
4. In the Metric T
ype field, select the OSPF metric type of the default route. Two types are
supported: External Type 1 and External Type 2. The default is External Type 2.
5. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
6. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.