User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
258
M6100 Web Management User Guide
7. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
8. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Table 96, RIP Advanced RIP Configuration describes the non-configurable data that is
displayed.
Table 96. RIP Advanced RIP Configuration
Field Description
Global Route Changes The number of route changes made to the IP Route Database by RIP. This
does not include the refresh of a route's age.
Global Queries The number of responses sent to RIP queries from other systems.
Advanced RIP Interface Configuration
To display the Advanced RIP Interface Configuration page, click Routing > RIP > Advanced
> Interface Configuration. The following page is displayed.
Configure the advanced RIP Interface Configuration settings.
1. Select the check box next to the Interface for which data is to be displayed or configured.
2. In the Go T
o Interface field, enter the Interface in unit/slot/port format and click the Go
button. The entry corresponding to the specified interface will be selected.