User Manual

Configuring Switching Information
179
M6100 Web Management User Guide
6. Use Fast Leave Admin mode to select the Fast Leave mode for a particular interface from
the menu. The default is disable.
7. Select the Proxy Querier Mode to Enable or Disable MLD Proxy Querier on the system. If
it is disabled, then MLD Proxy query with source IP 0::0 is not sent in response to an MLD
leave packet. If it is enabled, then MLD Proxy queries are sent.
The default value is Enable.
MLD VLAN Configuration
To access the MLD VLAN Configuration page, click Switching Multicast  MLD Snooping 
MLD VLAN Configuration.
1. Use VLAN ID to set the VLAN IDs for which MLD Snooping is enabled.
2. Use Admin Mode to enable MLD Snooping for the specified VLAN ID.
3. Use Fast Leave
Admin Mode to enable or disable the MLD Snooping Fast Leave Mode for
the specified VLAN ID.
4. Use Group Membership Interval to set the value for group membership interval of MLD
Snooping for the specified VLAN ID. V
alid range is (Maximum Response Time + 1) to 3600.
5. Use Maximum Response T
ime to set the value for maximum response time of MLD
Snooping for the specified VLAN ID. Valid range is 1 to (Group Membership Interval - 1). Its
value should be less than group membership interval value.
6. Use Multicast Router Expiry T
ime to set the value for multicast router expiry time of MLD
Snooping for the specified VLAN ID. Valid range is 0 to 3600.
Multicast Router Configuration
To access the Multicast Router Configuration page, click Switching Multicast  MLD
Snooping
 Multicast Router Configuration.