User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
144
M6100 Web Management User Guide
is set to a random value in the range of LeaveAllTime to 1.5*LeaveAllTime. The timer is
specified in centiseconds. Enter a number between 200 and 6000 (2 to 60 seconds). The
factory default is 1000 centiseconds (10 seconds). An instance of this timer exists for each
GARP participant for each port.
Auto-VoIP
The Auto-VoIP feature enables manual and auto assignment of VoIP phone traffic to a
special VLAN (e.g., Voice VLAN) allowing the assignment of special QoS parameters to that
traffic, giving it high priority services.
From the Auto-VoIP link, you can access the following pages:
• Protocol-based on page 144
• Advanced on page 154
Protocol-based
From the Protocol-based link, you can access the following pages:
• Port Settings on page 144
Port Settings
To display the Port Setting page, click Switching > Auto-VoIP > Protocol-based Port
Settings.