User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
107
M6100 Web Management User Guide
1. Use Go To Port to enter the Port in unit/slot/port format and click on the Go button. The
entry corresponding to the specified Port, will be selected.
2. Use Port to specify the list of ports on which LLDP - 802.1AB can be configured.
3. Link Status indicates whether the Link is up or down.
4. Use T
ransmit to specify the LLDP - 802.1AB transmit mode for the selected interface.
5. Use Receive to specify the LLDP - 802.1AB receive mode for the selected interface.
6. Use Notify to specify the LLDP - 802.1AB notification mode for the selected interface.
7. Optional TL
V(s):
• Use Port Description to include port description
TLV in LLDP frames.
• Use System Name to include system name
TLV in LLDP frames.
• Use System Description to include system description
TLV in LLDP frames.
• Use System Capabilities to include system capability
TLV in LLDP frames.
8. Use T
ransmit Management Information to specify whether management address is
transmitted in LLDP frames for the selected interface.
LLDP Statistics
To display this page, click System LLDP Statistics. A screen similar to the following is
displayed.