User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Default Settings
543
M6100 Web Management User Guide
ISDP Enabled (Versions 1 and 2)
RMON Enabled
TACACS Not configured
RADIUS Not configured
SSH/SSL Disabled
Telnet Enabled
Denial of Service Protection Disabled
Captive Portal Disabled
Dot1x Authentication
(IEEE 802.1X)
Disabled
MAC-Based Port Security All ports are unlocked
Access Control Lists (ACL) None configured
IP Source Guard (IPSG) Disabled
DHCP Snooping Disabled
Dynamic ARP Inspection Disabled
Protected Ports None
Private Groups None
Flow Control Support
(IEEE 802.3x)
Disabled
Head of Line Blocking Prevention Disabled
Maximum Frame Size 1518 bytes
Auto-MDI/MDIX Support Enabled
Auto Negotiation Enabled
Advertised Port Speed Maximum Capacity
Broadcast Storm Control Enabled
Port Mirroring Disabled
LLDP Enabled
LLDP-MED Enabled
MAC Table Address Aging 300 seconds (Dynamic Addresses)
DHCP Layer 2 Relay Disabled
Table 162. Default Settings (continued)
Feature Default