User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
53
M6100 Web Management User Guide
Table 25, Green Ethernet Statistics Summary on page 53 describes the non-configurable
fields.
Table 25. Green Ethernet Statistics Summary
Field Description
Current Power Consumption by all ports in Chassis
(mW
atts)
Estimated Power Consumption by all ports in chassis
in mWatts.
Estimated Percentage Power Saving per chassis (%) Estimated Percentage Power saved on all ports in
chassis due to Green mode(s) enabled.
Cumulative Energy Saving per Chassis (Watts *
Hours)
Estimated Cumulative Energy saved per Chassis in
(W
atts * Hours) due to all green modes enabled.
Unit Displays the Unit ID.
Green Features supported on this unit List of Green Features supported on the given unit
which could be one or more of the following:
Energy-Detect (Energy Detect), Short-Reach (Short
Reach), EEE (Energy Ef
ficient Ethernet), LPI-History
(EEE Low Power Idle History), LLDP-Cap-Exchg
(EEE LLDP Capability Exchange), Pwr-Usg-Est
(Power Usage Estimates).
Interface Interface for which data is displayed or configured.
Energy Detect Admin Mode Enable / Disable Energy Detect Mode on the port.
With this mode is enabled, when the port link is down
the PHY automatically goes down for short period of
time, and then wakes up to check link pulses.
This
will allow performing auto-negotiation and saving
power consumption when no link partner is present.
Energy Detect Operational Status Current operational status of the Energy Detect
mode.
Short Reach Admin Mode Enable / Disable Short Reach Admin Mode on the
port. With short reach mode enabled, PHY is forced
to operate in low power mode irrespective of the
cable length.
Short Reach Operational Status Current operational status of the Short Reach mode.
EEE Admin Mode Enable / Disable Energy Efficient Ethernet Mode on
the port. With EEE mode enabled, Port transitions to
Low power Mode during Link Idle condition.
2. Click Update to update the page with the latest information on the switch.
Green Ethernet EEE LPI History
Use this page to configure the Green Ethernet Mode EEE LPI History settings.