User Manual

Managing Device Security
495
M6100 Web Management User Guide
1. Use ACL Type to specify the type of ACL. Valid ACL Types include IP ACL, MAC ACL,
and IPv6 ACL.
2. Use ACL ID to display all the
ACLs configured, depending on the ACL Type selected.
Table 161. ACL VLAN Binding Table
Field Description
Direction Specifies the packet filtering direction for ACL.
VLAN ID Specifies VLAN ID for ACL mapping.
Sequence Number An optional sequence number may be specified to
indicate the order of this access list relative to other
access lists already assigned to this VLAN and
direction.
A lower number indicates higher
precedence order. If a sequence number is already
in use for this VLAN and direction, the specified
access list replaces the currently attached access list
using that sequence number. If the sequence
number is not specified by the user (i.e. the value is
0), a sequence number that is one greater than the
highest sequence number currently in use for this
VLAN and direction will be used. Valid range is (1 to
4294967295).
3. Click Add to add a VLAN ID to the selected ACL ID.
4. T
o delete a VLAN ACL-to-interface binding, select the check box next to the interface and
click Delete.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.