User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Managing Device Security
451
M6100 Web Management User Guide
Control
To display the page, click the Security Control tab. The Control tab contains links to the
following features:
• DHCP Snooping on page 451
• IP Source Guard on page 455
• Dynamic ARP Inspection on page 457
• Captive Portal on page 461
DHCP Snooping
The DHCP Snooping link contains links to the following pages:
• DHCP Snooping Global Configuration on page 451
• DHCP Snooping Interface Configuration on page 452
• DHCP Snooping Binding Configuration on page 452
• DHCP Snooping Persistent Configuration on page 453
• DHCP Snooping Statistics on page 454
DHCP Snooping Global Configuration
To display the DHCP Snooping Global Configuration page, click Security Control> DHCP
Snooping
Global Configuration.
DHCP Snooping Configuration
1. Use DHCP Snooping Mode to enable or disable the DHCP Snooping feature.
The
factory default is disabled.
2. Use MAC Address
Validation to enable or disable the validation of sender MAC Address
for DHCP Snooping. The factory default is enabled.