User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
355
M6100 Web Management User Guide
Table 144. Multicast Mroute Table
Field Description
Group IP The destination group IP address.
Source IP The IP address of the multicast packet source to be combined with the Group
IP to fully identify a single route whose Mroute table entry
.
Incoming Interface The incoming interface on which multicast packets for this source/group
arrive.
Outgoing Interfaces The list of outgoing interfaces on which multicast packets for this
source/group are forwarded.
Up Time (hh:mm:ss) The time in seconds since the entry was created.
Expiry Time (hh:mm:ss) The time in seconds before this entry will age out and be removed from the
table.
RPF Neighbor The IP address of the Reverse Path Forwarding (RPF) neighbor.
Protocol The multicast routing protocol which created this entry. The possible values
are:
• PIM-DM
• PIM-SM
Flags The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM.
The possible values are RPT or SPT. For other protocols
a – (dash) is displayed.
IPv6 Multicast PIM
From the IPv6 Multicast > IPv6 PIM link, you can access the following pages:
• IPv6 PIM Global Configuration
• IPv6 PIM SSM Configuration on page 356
• IPv6 PIM Interface Configuration on page 356
• IPv6 PIM Neighbor on page 358
• IPv6 PIM Candidate Rendezvous Point Configuration on page 358
• IPv6 PIM Bootstrap Router Candidate Configuration on page 359
• IPv6 PIM Static Rendezvous Point Configuration on page 360
IPv6 PIM Global Configuration
To display the IPv6 PIM Global Configuration page, click Routing IPv6 Multicast IPv6
PIM
Global Configuration. The following page is displayed.