User Manual

Routing
333
M6100 Web Management User Guide
Multicast Interface Configuration
 To display the Multicast Interface Configuration page, click Routing > Multicast > Interface
Configuration. The following page is displayed.
 Configure Multicast Interface
1. In the Go T
o Interface field, enter the interface in unit/slot/port format and click on the
Go button. The entry corresponding to the specified interface is selected.
2. Select the check box next to the routing interface for which data is to be displayed or
configured.
3. Enter the TTL Threshold below which a multicast data packet will not be forwarded from
the selected interface. Enter a number between 0 and 255.
The default is 1. If you enter 0,
all multicast packets for the selected interface will be forwarded. You must configure at least
one router interface before you see this field.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
5. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
Multicast DVMRP
From the Routing > Multicast > DVMRP link, you can access the following pages:
• DVMRP Global Configuration on page 334
• DVMRP Interface Configuration on page 334
• DVMRP Neighbor on page 336
• DVMRP Next Hop on page 337
• DVMRP Prune on page 337
Protocol The multicast routing protocol presently activated on the router, if any.
Table Entry Count
The number of multicast route entries currently present in the Multicast route
table.
Field Description