User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
326
M6100 Web Management User Guide
Advanced VRRP Secondary IP Address Configuration
To display the Advanced VRRP Secondary IP Address Configuration page, click Routing >
VRRP > Advanced > VRRP Secondary IP Address Configuration. The following page is
displayed.
Configure the Advanced VRRP Secondary IP Address Configuration settings.
1. In the VRRP Interface - VRRP ID field, select one of the existing V
irtual Routers, listed
by interface number and VRRP ID.
2. In the Secondary IP
Address field, enter the IP address for the interface. This address
must be a member of one of the subnets currently configured on the interface. This value is
read-only once configured.
3. Click Add to add a new secondary IP address to the selected VRRP interface.
4. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
6. Click Delete to delete the selected secondary IP address interface.
Table 124, Advanced VRRP Secondary IP Address Configuration describes the
non-configurable data that is displayed.
VMAC Address The virtual MAC Address associated with the Virtual Router, composed of a
24-bit organizationally unique identifier, the 16-bit constant identifying the
VRRP address block and the 8-bit VRID.
State The current state of the Virtual Router. Possible values are:
• Initialize
• Master
• Backup
Field Description