User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
21
M6100 Web Management User Guide
Figure 9. Device Status
The following table describes the non-configurable Device Status information.
Table 8. Device Status
Field Description
Unit ID The unit number in the chassis.
Firmware Version The release.version.maintenance number of the
code currently running on the switch. For example, if
the release was 1, the version was 2 and the
maintenance number was 4, the format would be
'1.2.4'.
Boot Version The version of the boot code which is in the flash
memory to load the firmware into the memory
.
CPLD Version The version of the software for CPLD.
Serial Number The serial number of this switch.