User Manual

Configuring Switching Information
206
M6100 Web Management User Guide
Table 81. VPC Interface Details
Field Description
Status The status of the VPC identifier.
VPC Identifier The VPC interface identifier value. The range is 1 to
63.
Configured VLANs The VLAN ID or list of VLAN IDs in which the LAG is
a member
.
Note: If the VLAN Member or the VLAN Tag field
exceeds the maximum number of displayable VLANs,
an Exceeded data limit to display message is shown.
Editing the values of these fields is prevented when at
least one port reaches the maximum limit of VLANs
during port multiselection.
Egress Tagging The VLAN ID or list of VLAN IDs on which the LAG is
tagged.
Peer Link STP Mode The Spanning Tree Protocol Administrative Mode
associated with the LAG.
3. Click Update to update the page with the latest information on the switch.
Self Members
The Self Member fields provide information about the VPC member ports on the local device.
1. Select an ID in the Self Port field which lists the ID of each port that is a member of the
port channel configured as a VPC interface on the current switch.
2. The operational status of the Self port is displayed in the Status field.
3. Click Update to update the page with the latest information on the switch.
Peer Members
The Peer Member fields provide information about the VPC member ports on the peer
device.