User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
18
M6100 Web Management User Guide
a. System Name - Enter the name you want to use to identify this switch. You may use
up to 255 alphanumeric characters. The factory default is blank.
b. System Location - Enter the location of this switch.
You may use up to 255
alphanumeric characters. The factory default is blank.
c. System Contact - Enter the contact person for this switch.
You may use up to 255
alphanumeric characters. The factory default is blank.
d. Login Timeout - Specify how many minutes of inactivity should occur on a serial port
connection before the switch closes the connection. Enter a number between 0 and
160: the factory default is 5. Entering 0 disables the timeout.
3. Click Apply to send the updated screen to the switch and cause the changes to take ef
fect
on the switch. These changes will not be retained across a power cycle unless a save is
performed.
The following table describes the status information the System Page displays.
Table 4. System Information
Field Description
Product Name The product name of this switch.
IPv4 Network Interface The IPv4 address and mask assigned to the network
interface.
IPv6 Network Interface The IPv6 prefix and prefix length assigned to the
network interface.
IPv4 Loopback Interface The IPv4 address and mask assigned to the
loopback interface.
IPv6 Loopback Interface The IPv6 prefix and prefix length assigned to the
loopback interface.
System Date The current date.
System Up time The time in days, hours and minutes since the last
switch reboot.
Current SNTP Sync Status Displays the current SNTP sync status.
System SNMP OID The base object ID for the switch's enterprise MIB.
System Mac Address Universally assigned network address.
Supported Java Plugin Version The supported version of Java plugin.
Current SNTP Synchronized Time Displays the SNTP Synchronized time.
The highest temp in chassis (C) The general temperature of the switch in degrees
Centigrade.
Temperature traps range Identifies minimum and maximum of traps range.