User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring Switching Information
173
M6100 Web Management User Guide
1. Use Interface to select the physical interface for which you want Multicast Router to be
enabled.
2. Use Multicast Router to enable or disable Multicast Router on the selected interfaces.
3. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
4. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Multicast Router VLAN Configuration
This page configures the interface to only forward the snooped IGMP packets that come from
VLAN ID (<VLANID>) to the multicast router attached to this interface. The configuration is
not needed most of the time since the switch will automatically detect the presence of a
multicast router and forward IGMP packets accordingly. It is only needed when you want to
make sure that the multicast router always receives IGMP packets from the switch in a
complex network.
To access the Multicast Router VLAN Configuration page, click Switching
Multicast IGMP
Snooping
Multicast Router VLAN Configuration.