User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Managing Device Security
425
M6100 Web Management User Guide
Access Profile Configuration
To display the Access Profile Configuration page, click Security Access > Access Control
> Access Profile Configuration. The following page is displayed.
Configure the Access Profile settings.
1. In the Access Profile Name field, enter the name of the access profile to be added.
The maximum length is 32 characters.
2. Select the Activate Profile check box to activate an access profile.
3. Select the Deactivate Profile check box to deactivate an access profile.
4. Select the Remove Profile check box to remove an access profile.
The access profile
should be deactivated before removing it.
5. The Packets Filtered field displays the number of packets filtered.
6. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
7. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
8. Click Update to update the page with the latest information on the switch.
Profile Summary
Table 157, Access Profile Configuration Profile Summary describes the non-configurable
data that is displayed.