User Manual

Managing Device Security
417
M6100 Web Management User Guide
2. Use SSH Version 1 to Enable or Disable Protocol Level 1 for SSH. The currently configured
value is shown when the web page is displayed. The default value is Enable.
3. Use SSH V
ersion 2 to Enable or Disable Protocol Level 2 for SSH. The currently configured
value is shown when the web page is displayed. The default value is Enable.
4. Use SSH Session T
imeout to configure the inactivity time-out value for incoming SSH
sessions to the switch. The acceptable range for this field is (1-5) minutes.
5. Use Maximum Number of SSH Sessions to configure the maximum number of inbound
SSH sessions allowed on the switch.
The currently configured value is shown when the web
page is displayed. The acceptable range for this field is (0-5).
6. Use Login Authentication
List to select an authentication list from the menu. This list is
used to authenticate users who try to login to the switch.
7. Use Enable Authentication
List to select an authentication list from the menu. This list is
used to authenticate users who try to get “enable” level privilege.
8. Click Update to update the page with the latest information on the switch.
Field Description
Current Number of SSH Sessions Displays the number of SSH connections currently in
use in the system.
Keys Present Displays which keys, RSA, DSA or both, are present
(if any).
Host Keys Management
Use this menu to generate or delete RSA and DSA keys.
To display the Host Keys Management page, click Security
 Access > SSH  Host Keys
Management.