User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
343
M6100 Web Management User Guide
Table 136. Multicast IGMP Groups
Field Description
Interface The interface for which data is to be displayed.
Multicast Group IP The IP multicast group address for which data is to be displayed.
Last Reporter The IP address of the source of the last membership report received for the
IP Multicast group address on the selected interface.
Up Time The time elapsed since this entry was created.
Expiry Time The minimum amount of time remaining before this entry will be aged out.
Version 1 Host Timer The time remaining until the local router will assume that there are no longer
any IGMP version 1 members on the IP subnet attached to this interface.
When an IGMPv1 membership report is received, this timer is reset to the
group membership timer
. While this timer is non-zero, the local router ignores
any IGMPv2 leave messages for this group that it receives on the selected
interface. This field is displayed only if the interface is configured for IGMP
version 1.
Version 2 Host Timer The time remaining until the local router will assume that there are no longer
any IGMP version 2 members on the IP subnet attached to this interface.
When an IGMPv2 membership report is received, this timer is reset to the
group membership timer
. While this timer is non-zero, the local router ignores
any IGMPv1 and IGMPv3 leave messages for this group that it receives on
the selected interface. This field is displayed only if the interface is configured
for IGMP version 2.
Compatibility This parameter shows group compatibility mode (v1, v2 and v3) for this group
on the specified interface.
Filter Mode The source filter mode (Include, Exclude, or NA) for the specified group on
this interface. When NA mode is active, the field is blank
IGMP Membership
To display the Multicast IGMP Membership page, click Routing Multicast IGMP IGMP
Membership. The following page is displayed.
1. Use the Search By menu to search for multicast entries by Interface or Group IP.
• Select Interface from the Search list, enter the Interface in unit/slot/port format, for
example 1/0/13, then click Go. If the entry exists, the entry is displayed as the first
entry
, followed by the remaining entries.