User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Routing
332
M6100 Web Management User Guide
Multicast Global Configuration
To display the Multicast Global Configuration page, click Routing > Multicast > Global
Configuration. The following page is displayed.
Configure Multicast Forwarding Globally
1. In the Admin Mode field, select the Enable or Disable option to set the administrative
status of Multicast Forwarding in the router
. The default is Disable.
2. Click Apply to send the updated configuration to the switch. Configuration changes take
ef
fect immediately.
3. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Table 128, Multicast Global Configuration on page 332 describes the non-configurable data
that is displayed.
Table 128. Multicast Global Configuration
Protocol The multicast routing protocol which created this entry. The possible
values are:
• PIM-DM
• PIM-SM
• DVMRP
Flags The value displayed in this field is valid if the multicast routing protocol
running is PIM-SM.
The possible values are RPT or SPT. For other
protocols a “------” is displayed.
Field Description
Protocol State The operational state of the multicast forwarding module.
Table Maximum Entry Count The maximum number of entries in the IP Multicast routing table.
Field Description