User Manual

Configuring System Information
29
M6100 Web Management User Guide
Click Update to update the page with the latest information on the switch.
Loopback Interface
Use this page to create, configure, and remove Loopback interfaces.
To display the Loopback Interface page, click System > Management > Loopback Interface.
A screen similar to the following is displayed.
1. Use the Loopback Interface Type field to select IPv4 or IPv6 loopback interface to
configure the corresponding attributes.
2. Use the Loopback ID field to select list of currently configured loopback interfaces.
3. Use the Primary Address field to input the primary IPv4 address for this interface in dotted
decimal notation.
This option is visible when IPv4 loopback is selected.
4. Use the Primary Mask field to input the primary IPv4 subnet mask for this interface in dotted
decimal notation.
This option is visible when IPv4 loopback is selected.
5. Use the Secondary IP
Address field to input the secondary IP address for this interface in
dotted decimal notation. This input field is visible only when 'Add Secondary' is selected.
This option is visible when IPv4 loopback is selected.
6. Use the Secondary Subnet Mask field to input the secondary subnet mask for this interface
in dotted decimal notation.
This input field is visible only when 'Add Secondary' is selected.
This option is visible when IPv4 loopback is selected.
7. Use the IPv6 Mode field to enable IPv6 on this interface using the IPv6 address.
This option
is only configurable prior to specifying an explicit IPv6 address. This option is visible when
IPv6 loopback is selected.
File Size This field displays the Size of the file stored in the
USB flash drive in bytes
Modification Time
This field displays the Last modification time of the
file stored in the USB flash drive.
Field Description