User Manual

Configuring System Information
22
M6100 Web Management User Guide
Click Update to update the page with the latest information on the switch.
System CPU Status
Use this page to display the system resources.
To display the System Resource page, click System > Management > System CPU Status.
A screen similar to the following is displayed.
Internal AC-1, Internal AC-2, etc. Indicates the status of the appropriate power module
in each unit. Status can be any of the following:
• Operational — Power module is present and
functioning properly.
• Powering — Main power is failed or disconnected
but RPS provides power to the switch.
• Not Present — Power module is not present in
the slot.
• Not powered — Power module is present but not
connected to the power source.
• Not powering — Power module is present and
connected but the switch uses another power
source.
• Incompatible — Power module is present but
incompatible.
• Failed — Power module is present, but power
cable is not plugged-in or a bad cable is
plugged-in.
PoE Version Version of the PoE controller FW image.
N/A indicates that the Poe is not supported by the
unit.
MAX PoE Indicates the status of maximum PoE power
available on the switch as follows:
• ON — Indicates less than 10W of PoE power
available for another device.
• OFF — Indicates at least 10W of PoE power
available for another device.
• N/A — Indicates that PoE is not supported by the
unit.
PoE D-Card Type Indicates the type of the PoE daughter card plugged
in. Possible values are:
• XCM89P — PoE card supporting 802.3at
standard (backward compatible with 802.3af).
• XCM89UP — PoE card supporting UPOE
pre-standard (backward compatible with
802.3af/802.3at).
• Not Installed — PoE card is not plugged in.
Field Description