User Manual

Configuring Switching Information
185
M6100 Web Management User Guide
7. Click Apply to send the updated configuration to the switch. Configuration changes take
effect immediately.
Field Definition
MVR Max Multicast Groups Displays the maximum number of multicast groups
that MVR supports.
MVR Current Multicast Groups Displays current number of the MVR groups
allocated.
MVR Group Configuration
To display the MVR Group Configuration page, click Switching > MVR > Advanced > MVR
Group Configuration. A screen similar to the following is displayed.
1. Use the MVR Group IP to specify the IP Address for the new MVR group.
2. Use the Count to specify the number of contiguous MVR groups. It is a service option
helping user to create multiple MVR groups via single press of
Add button. If the field is
empty, then pressing the button creates only one new group. The field is displayed as empty
for each particular group. The range is from 1 to 256.
3. Click Add to add a new MVR group.
4. Click Delete to delete a selected MVR group.
5. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
Field Definition
Status Displays the status of the specific MVR group.
Members Displays the list of ports that participate in the
specific MVR group.
MVR Interface Configuration
To display the MVR Interface Configuration page, click Switching > MVR > Advanced > MVR
Interface Configuration. A screen similar to the following is displayed.