User Manual

Configuring Switching Information
151
M6100 Web Management User Guide
3. Enter the IP address of the iSCSI target. The default is 0.0.0.0.
4. Enter the iSCSI name of the iSCSI target.
The iSCSI Target Name can be up to 233
characters in length.
5. Click Add to add the new iSCSI targets configuration.
6. Click Delete to delete a selected iSCSI targets configuration.
7. Click Cancel to cancel the configuration on the screen and reset the data on the screen to
the latest value of the switch.
iSCSI Sessions Detailed
Use the iSCSI Sessions Detailed screen to display detailed information about iSCSI
sessions.
1. Click Switching > iSCSI > Advanced > Sessions Detailed.
The Table 72 describes the non-configurable iSCSI Sessions Detailed information.
Table 72. iSCSI Sessions
Field Description
Session Index The list of session indices.
The rest of the fields on this page correspond to the currently selected Session Index.
Target Name The target’s name.
Initiator Name The initiator’s name.
Up Time The time elapsed since the creation of the current
session.
Time for Aging Out (in Seconds) The time left for the current session to expire in
seconds.
Initiator Session ID (ISID) The unique identifier an initiator assigns to its
session endpoint which, when combined with the
iSCSI initiator name, provides a unique name for the
iSCSI initiator port.
Initiator IP Address The initiator’s IP address.
Initiator TCP Port The initiator’s TCP port number of one of the
connections between the target and initiator
.
Target IP Address The IP address of the target.
Target TCP Port The target’s TCP port number of one of the
connections between the target and initiator
.
Detailed
Click Update to update the page with the latest information on the switch.