User Manual
Table Of Contents
- M6100 Web Management User Guide
- Contents
- 1. Getting Started
- 2. Configuring System Information
- 3. Configuring Switching Information
- 4. Routing
- 5. Configuring Quality of Service
- 6. Managing Device Security
- 7. Monitoring the System
- 8. Maintenance
- 9. Help
- A. Default Settings
- B. Configuration Examples
- C. Notification of Compliance
Configuring System Information
119
M6100 Web Management User Guide
Table 63. LLDP-MED Remote Device Information
Field Description
Capability Information: Specifies the supported and enabled capabilities that was received in MED
TLV on this port.
Supported Capabilities Specifies supported capabilities that was
received in MED TLV on this port.
Enabled Capabilities Specifies enabled capabilities that was
received in MED TLV on this port.
Device Class Specifies device class as advertised by the
device remotely connected to the port.
Network Policy Information: Specifies if network policy TLV is received in the LLDP frames on this
port.
Media Application Type Specifies the application type. Types of
application types are unknown, voicesignaling,
guestvoice, guestvoicesignalling,
softphonevoice, videoconferencing,
streammingvideo, vidoesignalling. Each
application type that is received has the VLAN
id, priority, DSCP, tagged bit status and
unknown bit status. A port may receive one or
many such application types. If a network
policy TLV has been received on this port, only
then would this information be displayed.
VLAN Id Specifies the VLAN id associated with a
particular policy type.
Priority Specifies the priority associated with a
particular policy type.
DSCP Specifies the DSCP associated with a
particular policy type.
Unknown Bit Status Specifies the unknown bit associated with a
particular policy type.
Tagged Bit Status Specifies the tagged bit associated with a
particular policy type.